Jump to content
LegacyGT.com

RPA Performance

Members
  • Posts

    95
  • Joined

About RPA Performance

  • Birthday 02/24/1986

Personal Information

  • Location
    Greensboro, NC
  • Car
    05 Legacy GT, 01 Miata Turbo, 08 350Z
  • Interests
    Auto Parts

Converted

  • Homepage
    http://www.rpaperformance.com

RPA Performance's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. We went to the quarter mile for the first time a while back and I found one of the slips. I'll try and get it scanned soon User name - RPA Performance 60' time - 1.861 1/4 mile time - 13.385 trap speed - 104.07 track - ZMax Dragway elevation - 630 ft. temperature - 68 F year of car - 2005 MT turbo- Stock VF40 octane of gas used 93 Water Injection yes/no - 50/50 Water MEth Nitrous yes/no - no Tires/inflation pressure - Michelin Pilot Exalto 225/45/17 36 PSI Other supporting modifications - Catless Uppipe and Downpipe, FMIC, 76mm Intake, EBCS, Water/Meth, Exhaust Manifold, Catback, 07 WRX Clutch and FW,
  2. I have always been intrigued by the drag strip and finally decided to get up and go today. I made some runs by myself as well as running against a turbocharged Mazda MX6. I was the only import there until the Mazda showed up. The runs were made at the 1/8th mile Piedmont Dragway which is at around 880 ft elevation. I have done some autocross and other similiar events but this was my first time at the drag strip and I felt pretty good as I got more runs in and believe once I improve my launching and driving I can shave off a bit more of my time. Here are the runs R/T .772 60' 1.939 330 5.609 1/8 8.693 MPH 81.79 ------- Legacy ---- ---- MX-6 R/T ---- .785 ---- ----- .646 60' ---- 1.882 ---- ----- 2.106 330 --- 5.632 ---- ----- 5.838 1/8 --- 8.705 ---- ----- 8.794 MPH -- 82.13 ---- ----- 84.31 ------- Legacy ---- ---- MX-6 R/T ---- .846 ---- ----- .644 60' ---- 2.084 ---- ----- 2.202 330 --- 5.874 ---- ----- 6.084 1/8 --- 8.953 ---- ----- 8.980 MPH -- 82.46 ---- ----- 87.91 Once I improve my launching and driving I believe I should be able to get to low 8s User Name: RPA Performance Date: 10/25/2009 Track: Piedmont Dragway Elevation 880 ft Temperature: 55 F Year of Car: 2005 Transmission: MT Turbo: VF40 Octane: 93 Water Injection: Yes Nitrous: No Tires Inflation pressure: 38/36 Other Modifications: The Legacy was built by RPA Performance and tuned by Motion Lab Tuning. It has the following: RPA Divorced Wategate Downpipe RPA Mufflers RPA Short Ram Intake RPA Electronic Boost Control Solenoid RPA Front Mount Intercooler Kit TurboXS Recirc Valve GTSpec Exhaust Manifold GTSpec Uppipe Innovate LC-1 Wideband with DB-Blue gauge 07 WRX Clutch and Flywheel RPA Hood Dampers RBS Grille with JDM L7 badge RBS Front Lip Perring 25mm Front Sway Bar Rallitek Front Endlinks Rota Torque 17x7.5 It made 286 hp and 342 ft-lbs on a Dyno Dynamics dyno I will have to dig out the scanner and scan the slip soon
×
×
  • Create New...

Important Information

Terms of Use