-
Posts
30 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by Hotwire
-
-
Should also clarify, my car is an
ADM LGT Wagon
EJ20X 2.0T with Dual AVCS
5EAT
-
Well Im happy to report I succussfully flashed my MY04 GT ECU tonight using the VAG-COM cable. After humming and harring whether to attempt it - I did it at my mates workshop with the tactrix 1.3M cable as a backup if the flash went wrong.... and well it didn't.
Using:
- ECU Flash 1.42
- the fore mentioned driver
- windows XP SP2
worked a treat. Test wrote first, worked fine, so did a full write. And now I have the timing backed off to bring the IAM back to 1.0 where it should be!
-
I have just my VAG-COM cable from Hong Kong ($16US delivered) to read the ROM of my 04 ADM Liberty GT (Same spec as JDM Legacy GT). I was using ECUFlash V1.38 as I could not get an earlier copy than that, and it read fine.
Thanks for the writeup!
Any hints when it comes to flashing on another map?
-
From the ECUFlash History page here:
http://www.openecu.org/index.php?title=EcuFlash&action=history
(cur) (last) 12:46, 1 October 2007 Cboles 1.33
(cur) (last) 12:40, 1 October 2007 Cboles 1.33
(cur) (last) 23:07, 6 September 2007 Cboles 1.32
(cur) (last) 09:54, 24 August 2007 Cboles 1.31
(cur) (last) 09:53, 24 August 2007 Cboles 1.31
(cur) (last) 15:52, 9 March 2007 Cboles 1.30
(cur) (last) 05:25, 4 October 2006 Cboles 1.29a
Hope this helps
Using an Autonostics/Vag-Com Cable To Read/Flash ECU's
in Tuning
Posted