Jump to content
LegacyGT.com

valerka

Members
  • Posts

    84
  • Joined

Personal Information

  • Location
    Toronto
  • Car
    2007 Spec B
  • Interests
    Many!

valerka's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. Did mine last night, for those that are not aware, and it has only been mentioned a few times, the driver side is a little of a different procedure on the 2007+. You've got a plastic hot air pump which partially blocks both coils on the driver side. There is no need to completely remove the pipe, all you have to do is to unbolt the actual pump, unbolt the pipe from the engine, and disconnect the pipe from the pump. It will still be connected on one side, but I have found that it's easily movable to the side and you basically have the same access to the spark plugs as the 05-06 guys. Otherwise the process is not that complicated, just time consuming. Also the hardest plug to remove/install I found to be the driver side rear one, it has the least clearance and turning the coil 108 degrees definitely helps.
  2. I am wondering if the Hog zawst mode will affect the emission testing. Thinking that some of the gasses will escape at the created spacing thus the emission reader will not get the full amount of exhaust gasses to analyze. Any thoughts on that?
×
×
  • Create New...

Important Information

Terms of Use