mike-tracy

Already have braided lines.

Hi Neal, would you consider taking deposits?

I don't think these have been released yet?

As an update, the .8 BAR / 11.6 PSI wastegate spring opens too soon, and I wasn't able to hit my target boost of 18psi. I haven't gotten around to trying the next stiffer spring yet.

Thanks for the update, Neal

Just scored a set from a 2006 V8 Touareg today!

 

 

For anyone who is trolling the junkyard for these, make sure you have 1/2" tools. This is what happened to my favorite 3/8" gearwrench ratchet:

 

two 21mm bolts hold each one in, and I'm not sure what size the brake line is (i used a small crescent wrench). I also snipped the brake pad sensor since I didn't want them to charge extra for that and I know I wouldn't use it.

 

$50 out the door, thank you Pick-n-Pull!

 

Can't wait till you're done with these, Neal

I am interested in a set of brackets as well.

Updates?

You posted in the right place, but you didn't look through the "sticky" links first. Read the pertinent ones and then come back with any questions you still have.

 

There are stickys for every section on this and (virtually all) other forums. They are pretty much the "frequently asked questions" on forums.

 

That worked, thanks a ton!

Lastly, this is what LegacyGT.com looks like on my browser, are you saying if I become a paying member it will go back to normal?:

 

 

It's hard to read or find anything.

None of the local shops were willing to help because I didn't order the turbo or cover from them.

 

I ordered this waste gate adaptor, and it fit my turbo:

Kinugawa Billet Adjustable Turbo Wastegate Actuator Subaru TD04 TD04HL TD05H TD06SL2

Spring: 0.8 bar / 11.7 Psi 309-02086-003

 

Secondly, the stock twinscroll coolant lines interfered with the new compressor cover, so I used some kinugawa coolant lines designed for a non-twinscroll td04, and that worked perfectly.

 

I can deal with ugly forum appearance, do you know the answer to my waste-gate conundrum?

Hi, I've been running a jdm TD04HLA-19t for a few years now on my 92 Legacy. I had a custom elbow made to run it with FMIC. Well that FMIC pissed me off for the last time (giant pain in the ass every time you need to work in the engine bay) and I'm switching to the factory AWIC with an aftermarket heat exchanger and pump.

 

Since the AWIC core attaches to turbos the same way STI's and 02-07 WRX's do, I swapped the cover on my "19t" for one from an 02-07 WRX (a 13t) that had been machined to fit the 19t wheel. That part went smoothly. The "19t" wastegate bracket didn't fit the "13t" cover. The 13t wastegate fits the "13t" cover, of course. But it doesn't have enough offset to reach the wastegate itself. Anyone know of an aftermarket or preferably an oem solution?

 

Thanks.

 

Also, how do I change the theme on this forum, I haven't logged in a few years and when I came back it looked like the internet circa 1995 lol.

 

Replaced my 21 y/o cracked OEM radiator with a Koyo one I got for free. Supposedly the Koyo's crack around the endtanks, so I'm on the lookout for a good condition oem one (91-94 SS or 1st gen turbo Impreza radiator)