Chucho

Haha ya i've always had this avatar and keep it as my desktop too lol. When i first saw your post i was pretty confused until i read your user name. Anyways good luck on the project

ya doing them in the oven is much easier

Sweet! Where'd you source out the strip LEDs?

 

www.yourledshop.com heres a forum about them too http://legacygt.com/forums/showthread.php?t=107062

Still working on the car. Making my Own grill now. Thanks again everyone for the help and support

Just finished clearing my headlights but also put my led's inside the headlights too. Hope you guys like it.

http://c1.ac-images.myspacecdn.com/images02/85/l_fb7a399fb11641ec985d874e15a42e64.jpg

ouch....sounds worse than mine. I can replace the bolt but you won't be able to replace a cracked headlight but seal it really really good. I'll keep you guys updated and take pics when all said and done.

:lol:I wish i read this before because i Cut the screw off from all the hatred trying to take it out.....:eek:then in the end it wasn't suppose to come off. But i'm going to stop by napa or home depot for another screw and bolt.

 

I guess all it needed was a really big "oomph" cause the driver side was really hard to pop out and after cutting that screw i thought it was still stuck from another screw and was mad:mad: enough that i wanted to rip it apart lol. Good thing nothing was connected left to tear apart. I guess it was just stuck in there really really good.

 

Thanks Again JeaGT for your help. I really appreciate it.

got the pop-it off!!!!

 

BUT now i see a screw about 4 inches away from that pop-its thats holding it together.

 

So now i'm about to go to home depot because i don't have a tool small enough to fit in there to take the screws out

 

LOL i've spent almost 4 hours just trying to take the bumper and grill apart...I'm making this a 2 day project Since i'm horrible at diy projects. I'm a Noob x10

 

But i'm not just clearing the headlights. I'm also doing my own grill and putting LEDs inside my headlights as a look like the new audi's

I am having problems on taking out my grill and bumper....

 

For the bumper i have all 7 pop-its out that are from under the bumper. I don't see any screws on the fender well.....

 

As for the grill part i have all the pop it's off the grill on the top and snapped the top part of the grill off.. Now i only see 4 screws on the grill and have taken them off.

 

What am i missing? Hope you understand what i'm talking about... Thanks in advance

found a quick solution to getting those pesky washers out of the y-pipe. Start your engine, rev, turn off engine, find washer and try not to drop it again.

 

lol same thing happened to me... i was like What do i do just leave it there? but then i remembered i had a magnetic screwdriver that i was able to stick the washer on and take it out the pipe. haha

Just installed the Hogzaust system today. I like it but had a question. Does anyone know if you were to leave the hogzaust system on.... would you still be able to pass the IM test. just curious.