Jump to content
LegacyGT.com

Gary Bechtold

Members
  • Posts

    342
  • Joined

Posts posted by Gary Bechtold

  1. I have an 06 LGT 5EAT, and I have these two wires connected to the front metal bracket as well. I installed the GS bracket over top of the oem bracket but now the Throttle body hose is difficult to wrap. What did you end up doing to get it to fit?

     

    You have to remove the old bracket and remove the clips from it. Otherwise the splitter won't line up right.

     

    Remove the clips from the old bracket with a small flat blade screwdriver and put in the new bracket with the new bolts provided by Grimmspeed.

  2. Speaking of brackets there was another one on my engine that had two wire clips attached to it. I had to disconnect the clips and remove the OEM bracket so I could put the bracket for the TMIC in place of it. Does anybody's car have this bracket or is that one of the things forgotten in the instructions when installing in a Legacy GT? Either way I figured it out and got it in. I'm pretty pleased with this. I just wish the Legacy specific instructions / video would have happened before I installed this.
×
×
  • Create New...

Important Information

Terms of Use