stupidaznmunkey

by other forums "terms", none of these are slammed.

check out s2ki and other JDM websites that have slammed threads - its dictated by how close your frame is to the ground.

slammed for example is: you have a hard time changing lanes because your front/rear bumper hits the divider marker

these are nicely lowered subarus

keep it going though!

heres more pictures

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0604.jpg

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0603.jpg

alrite you guys, just did this mod - took me about 2 hrs since i was pretty meticulous about the wiring and making sure that everything was sealed together pretty good.

i used this as a guide, but i realize that this mod may be a tad vague for beginners.

anyway, i did this for a 2010 and damn the clear ring made it look pretty bomb at night

anyway here are pics + some add ons to the OP's instructions.

hopefully this will take off some anxiety off people that are scared of tapping into existing wires or what not

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0585.jpg

aside from the household tools i used (scissors and some leftover wire) this is all you'll really need if you wanna go hardcore and solder everything together - these 3 things cost me like $8...if u wanna just ghetto tape everything up - then i guess e-tape LOL

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0586.jpg

i decided to shave the LED with a nail polish (the step 1 2 3 4 that makes your nail shiny HAHAHA) and it helped with the spacing issue of the LED+LED holder in the 2010 model leggy

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0590.jpg

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0587.jpg

as you can see, the spacing is kind of an issue - especially since the clear ring is where the OP had his LED holder put...so i got creative

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0588.jpg

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0589.jpg

yummm heres that clear ring that everyones jealous of

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0591.jpg

so here i am getting ready to solder it all up!

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0592.jpg

ehh good enough LOL

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0593.jpg

okay so i pretty much sealed the top and bottom up of the enclosure and stuffed it with cotton - it helps keep everything in place and i made sure that the LED stayed in place and yepppp

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0594.jpg

cotton stuffing!

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0595.jpg

so just cleaning everything up and making sure the wiring is clean

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0596.jpg

i tied up my wires with some original ones because there still is a moving shifter so i dont want my wires to get tangled up in that - so its safe to just route with the original wires

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0597.jpg

alrite so the OP had a 2nd post of him tapping into the 2nd wire - well i just looped my wire and routed it behind the purple wire of the brown connector (passenger side seat warmer) and just e-taped it up so it wouldnt move.

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0599.jpg

similar tactic with the black wire - i decided to be lazy and just wire the negative into this socket because it was available but the purple wire was so the cup holders would light up with everything else - and not when the car is put into position 2 (which is when the 12v socket turns on)

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0601.jpg

here we go!

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMAG0602.jpg

I am doing this. For sure 100%

I'm doing white - had blue in my old car!

heres my contribution:

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMG_4325.jpg

with 4th gen legacy 17s on

http://i62.photobucket.com/albums/h120/stupidaznmunkey/IMG_4689.jpg