Jump to content
LegacyGT.com

wsmith30132

I Donated
  • Posts

    195
  • Joined

Everything posted by wsmith30132

  1. Hey Dade,

     

    Whats going on man, I hope all is well. Curiosity is killing the cat and i was just curious if you have had a chance to tear the engine down and what you found. I hope you are still pleased with the purchase. Thanks again for sending the CD's back!

     

    Thanks,

     

    Wes

  2. Subscribed and thanks for the feedback. I am extremely curious to see results over the Perrin.
  3. Well I guess worst case scenario someone might be getting a great deal on a V1 kit in the market place. I'll contact them and see what they say. Thanks
  4. I have a SS-18GXR on order and was wondering if I need to to do anything different to run this kit with a BB CHRA housing? I am not familer with where the BB CHRA oil restriction resides in the system, banjo bolt? I already have the V1 kit, any assistance you could provide would be greatly appreciated. Thanks
  5. Not to hijack but since i was questioned here we go. Also, like i mentioned it could have been done a lot cheaper but is what i consider a good stage 3 build for my goals in addition to my current mods. It was a lot more than i originally would have thought, so that's why I spoke up earlier. 100k - Maintenance Crank Pulley Water Pump Water Pump Gaskets Gates Timing belt kit Thermostat Thermostat Gasket Spark Plugs Crank Pulley Removal Tool Accessory Belts Coolant Brake Fluid Power Mods Up-Pipe w/ Flex BOV EBCS Fuel Pump Fuel Pump O-Ring Group N Engine Mounts Turbo Inlet EcuTek E-Tune plus E85 Wideband O2 Sensor KS Tech Intake Heat Wrap 2" x 50" Gaskets Fuel Injectors w/ T1 Top Feed Conversion T1 Fuel Lines
  6. I just spent 4k for 100k maintenance parts, fuel upgrades, tune, and some supporting parts. In addition i still have to buy a turbo! One nice thing i was able to get everything i needed from Infamous so it was a one stop shop with great deals but things definitely add up. I could have gotten by a lot cheaper but I didn't want to half ass it. Spend some time reading this write up, very nicely done. http://legacygt.com/forums/showthread.php/turboi-wiki-twist-178684.html
  7. Thats an awsome write up man, great job! You wanna swing on up and give us a hand? Ever since he sold me his 5MT he hasnt been happy. I'm all for him trying it and I dont think I could take the auto either.
  8. So does this mean you will be kicked out of your 5eat pride club????
  9. Ooops, Wrong button
  10. So are you a member of the 5EAT Gay Pride Thread???
  11. This is what i might try. I have access to all the steel parts for free. [ame=http://www.youtube.com/watch?v=Xzd_F2KkNGs&feature=related]YouTube- Control arm 1- plan C rubber bushing removal[/ame] Do I need to grease the inside sleeve of the bushing?
  12. Were they worth it? So when I go to remove / istall these LCA Group N front and rear bushings can just match up a socket with the inner sleeve and tap them in / out? Will I need to add any grease to the inside of these? A post earlier mentiond the suspenion grease but didnt go into much detail. I also read on NASIOC where someone made a homemade puller. They used a pipe were the I.D. was bigger than the O.D. of the bushing but still fit on the arm. The pipe rests on the LCA. They used all-thread that goes through the pipe and bushing. On the bushing end the used flat washers that match up to the sleeves with a long nut.( the long nut allows you to still back the nut as it travels thought the LCA). On the open pipe end they used a piece of sheet metal with a hole through it and same concept. On this side though you will only need a regular nut. Any opinions would be appreciated before i dig into this. Thanks
  13. Awsome thanks, I appreciate all that put the info in this thread, I did end up ordering both Group N's yesterday. I think it would have bothered me down the road that they were different. ^ i definately woulndt have done that one unless it was in the pics. Thanks to all who put the good info and part numbers in here. Also, rallispec said they ordered some rear diff bushings for a legacy this week. They were 99 percent sure that they would fit since they were for the STI. They were group N mounts, anyone on here? i would love to hear some reviews and if they did fit?
  14. I just ordered my Group N rear bushing and I am debating on the front. The Group N front bushing is $54 anid the STI one is $36. For the little price difference wouldnt it be worth it to have the same stiffness on the LCA? or would you not notice any differece and be wasting $36? I get from this thread and the qualified people posting on here you wouldnt notice the difference and would just be wasting your money. Just making sure....
  15. I had a Perrin TMIC, AVO CAI, CrucialP&P&C manis with a Grimmspeed x-over, Cucial UP, Perrin long catless DP and Perrin cans. I dont have a PDF of my dyno sheet but on 93 I hit 270 whp and 300 wtq. On meth I hit 270 whp and 340 wtq. I posted some recent comparible logs in the tuning section with a XO2 mid and y installed. Airboys sheets dont show that difference and Testes ran some numbers and suggested a 10 wtq difference. I have the meth for a future turbo upgrade on the TMIC, as its not really worth the gains or risk on the stock turbo.
  16. Thanks for all of your time to this forum, it is appreciated. With the new EWG you now have my dream setup for the legacy. IM JEALOUS!!!
  17. Yeah i just bought a used one on here and guess what??? Yeah, not in the box when it gets here. Of course i get the, "Ive shipped hundreds of parts and never had one come up missing" line. Now its my ass that has to deal with fedex and try to track this thing down if i can. Not to mention im sure the actuator's all bent up or something. Not to happy about it.... Now he has my money and im stuck paying for a part that i dont have yet because of his neglegence. I will say that it might not be his fault but if you ship it in the same box as an inlet pipe your probally not doing it right. I should send him a link to this...
  18. Hey homo did you also read that the Blisteins aren't adjustable and the Konis are? WOW.... a bloody mary huh? So when did the big manly man stop drinking cosmos????? Your gay
  19. Paypal said it was too late to dispute...
×
×
  • Create New...

Important Information

Terms of Use