Jump to content
LegacyGT.com

leftride

I Donated
  • Posts

    523
  • Joined

Posts posted by leftride

  1. Sebastien, a few questions.

     

    1) So once the board is installed and as long as the switch is on 'Auto' or 'On' whatever is playing over the aux-in will play? Basically, all I listen to is my iPod, so I want to hear that whenever I start the car without having to press ANY buttons.

     

    2) Does the unit actually switch the sources? i.e. If I am listening to the radio and start playing something over the aux-in does the radio stop playing, or do you get both sources unless you switch the headunit to CD or something?

     

    3) Is the remote switch removable? If it's removed what 'mode' (Auto/On/Off) is the aux-in unit in?

     

    4) Is there a signup list for ordering? What's the process?

     

    Sorry if some of this is in the french manual :)

  2. As long as RedFloyd stands behind his product I'm not concerned about vendor status. I don't think the $70 would change anything.

     

    I'm just excited to try this out! keep us posted RedFloyd.

  3. I currently have the stock suspension setup, but would like to upgrade.

    My plans include:

    H Tein springs

    Hawk HPS pads

    New tires (preferably all seasons, What is a good tire?)

     

    Not Sure if i will be able to get all this done by august, but maybe. Do you think this would be a good setup? If you could only do one of them which would you do?

     

    if only 1, i'd definitely go tires! it'll improve braking and cornering.

     

    i'm on Falken 912's right now. much better better than re92s, but that's all i have to compare them too on the obxt.

  4. well i took the plunge....sound is great :)

     

    i am hogzawst stg 2 SS (stainless steel). nice rumble when you start it up and not bad otherwise. i actually hear my intake (avo panel filter and removed resonator) more than the exhaust at hard throttles.

     

    i'm sure i'll keep it for a while, only issue is being embarassed if i ever have to take it in for service and they point out my 'exhaust leak' :lol:

  5. Looks like the ground loop interrupt is for RCA cables, the board is for 3.5 mm cable. So for, say, Ipod, I'd neet 2 Y cables - to go from the board to the interrupt and then from interrupt back to 3.5mm Ipod. Am I right? Have you seen ground loop interrupt for 3.5mm connection anywhere?

     

    Radio shacks GLI

    http://www.radioshack.com/product/index.jsp?productId=2062214&cp=&kw=ground+loop&parentPage=search

     

    already has 1 y-adapter so you would only need 1 more y adapter.

×
×
  • Create New...

Important Information

Terms of Use