Jump to content
LegacyGT.com

naimouasta

Mega Users
  • Posts

    845
  • Joined

Everything posted by naimouasta

  1. http://www.meganracing.com/product_detail.asp?prodid=1580&catid=97 i just found this interesting. maybe the rear might work, but the front probably not.
  2. thats not a bad price? i see 2.5i limited's go for that much.
  3. good to know. i was hoping you were on specb tophats because i like the way your car sits. with specb tophats, i will sit higher still in the front.
  4. wow i think thats the perfect wheel/tire/suspension setup. what are the specs/parts?
  5. [ame=http://www.youtube.com/watch?v=KchOBAo36_8]2008 Subaru Legacy - YouTube[/ame] my kid brother doing a vid of me washing my car for class. please please ignore the end LOL. being retarded.
  6. waiting for hurricane sandy http://img341.imageshack.us/img341/7160/39808484.jpg
  7. 3rd gen legacy, i believe you have to press out the front. the rear is bolt on unit. 3rd gen has front suspension similar to older subies, and rear suspension similar to the 4th gen legacy.
  8. its located in the above head console. disassemble your overhead lights and then your airbag indicator.
  9. ok nevermind i fixed it if anyone cares. i reflowed/resoldered the resistor labeled "511". works like a charm.
  10. ok so i took it out, and nothing looks broken or anything? the specific circuit board for the airbag itself is only 1/2in by 2in with 4 led's on it. looks really simple. can't imagine it costing $100 for it. there are 7 resistors with numbers on them. i tested them with multimeter and they all check out. none of the circuits/wires are broken either? now what?
  11. sorry if i missed this somewhere but what are the advantages of a curved shield?
  12. i noticed that when the "airbag" is on in the gauge cluster, the passenger indicator by the lamp, its supposed to say "on" or "off" and it says neither, just "passenger airbag". so i assume my problem is the lamp also. i might just take it out and look for any broken wires.
  13. for your projector retrofit, does that little trim in front of the projector interfere with output at all? do you see it?
  14. if you plan on professionally painting it, yes then black, maybe even the blue. but don't rattle can it. also you need to get closer shots of those headlights .
  15. ic. so physically they fit other than the gap with the hood. i don't understand what you mean by "dremel out the lamp socket"?
×
×
  • Create New...

Important Information

Terms of Use