WillYang
-
Posts
2 -
Joined
Content Type
Profiles
Forums
Gallery
Posts posted by WillYang
-
-
So I have an 05 LGT Limited 5-speedMT. I just started tuning not too long ago(via COBB tuner) because I absolutely love DIYing and saving money is a big plus. Starting off and making the car run smoothly wasn't that much of an issue but the more I get into refining stuff the more barriers I hit. I wanted to start off with my build list before I explain my main issue:
Bottom end:
Manley H-TUFF rods
JE Pistons 99.75 8.5:1 comp ratio
King bearings(rod+main)
Brand new STI Nitrated Crank("430")
Other relevant mods/maintenance:
DW 1000cc injectors w/ 07-09 top feed rails
AEM 340lph fuel pump
Tomei Type L FPR
Kinugawa IWG actuator(14psi spring)
Grimmspeed EBCS
DIY tgv deletes(fully gutted)
VF52
Heads resurfaced, vac tested, and had 1 exh valve job done.
Okay now to the issues I'm having which I have tried looking up but had no luck. During normal driving with the AC off, I have the AFR set up to where I like it. The issue is when I have the AC on, especially at idle, AFR is extremely rich. I don't have a WBO2 sensor, which is on the list, but the AFR O2 sensor reads 11 at idle and the highest I'm seeing is 12-13. My question is why exactly is it dumping fuel with the AC on? Another question I have is, what else would cause boost to kick in during normal driving? My wastegate Duty cycle is almost zeroed out and I'm still seeing 2-6psi of boost at around 20-30% throttle. is I will have pics of some of the tables attached below
The last issue I have that probably isn't tuning-related, is the infamous 2-3k rpm stumble. Maybe there is something I missed but I've tried all the methods that I've found on these forums to negate it but had no luck. Those methods are:
- Reroute AFR vacuum and Tee'd off the BPV vacuum
- Different Fuel Pressure Regulator
- Richen the loads for that rpm range(13.5-13.9 afr)
- Raised the Fuel injector Latency(0.85ms to 1ms, this actually made it stumble a bit less but that's the best it gets.)
- BUILT ENGINE! (this wasn't why I built the engine though haha)
NOTE: CL to OL Delays are zeroed out
P.S. I feel like my ignition seems extremely low based on looking at other peoples and stock vs cobb stg2. Any higher and it picks up knock.
Amateur Tuning Questions
in Tuning
Posted