Triskite Posted July 19, 2006 Share Posted July 19, 2006 I was never a big fan of our LGT key (as you will soon see) and prefer to use the STI key... I used to hold the two together, slide the sti key into the ignition and turn, but that is too much of a hassle. Below is how to remove the chip from your stock key. Before: http://legacygt.com/forums/attachment.php?attachmentid=21433&stc=1&d=1153331229 After: http://legacygt.com/forums/attachment.php?attachmentid=21424&stc=1&d=1153330826 Tools Used: http://legacygt.com/forums/attachment.php?attachmentid=21422&stc=1&d=1153330826 This is what I started with. A double toothed saw. For more precise cutting, I moved on to a finely serrated blade http://legacygt.com/forums/attachment.php?attachmentid=21432&stc=1&d=1153330826 http://legacygt.com/forums/attachment.php?attachmentid=21432&stc=1&d=1153330826 Start by making a large grove near the top of the head of the key http://legacygt.com/forums/attachment.php?attachmentid=21431&stc=1&d=1153330826 It took me a while to bring myself to saw through that emblem. The most important thing is to know EXACTLY WHERE YOUR CHIP IS in the key. Refer to this picture, and note this is the side WITH the emblem: http://legacygt.com/forums/attachment.php?attachmentid=21421&stc=1&d=1153330826 This is the side WITHOUT the emblem: http://legacygt.com/forums/attachment.php?attachmentid=21418&stc=1&d=1153330826 Finish the cut all the way around, and then begin a diagnol slide along the metal of the key, around the chip so that you may eventually slide it loose. (refer to the "After picture") http://legacygt.com/forums/attachment.php?attachmentid=21427&stc=1&d=1153330826 Once you have done this, you can slide out a chunk of rubber that houses the chip: http://legacygt.com/forums/attachment.php?attachmentid=21428&stc=1&d=1153330826 Other side: http://legacygt.com/forums/attachment.php?attachmentid=21429&stc=1&d=1153330826 The chip itself is in a little box-like housing inside this rubber chunk. http://legacygt.com/forums/attachment.php?attachmentid=21419&stc=1&d=1153330826 When fully removed/surgeoned, the chip is about the size of a dime: http://legacygt.com/forums/attachment.php?attachmentid=21426&stc=1&d=1153330826 Here it is: http://legacygt.com/forums/attachment.php?attachmentid=21416&stc=1&d=1153330826 And again http://legacygt.com/forums/attachment.php?attachmentid=21417&stc=1&d=1153330826 here it is next to the sti key http://legacygt.com/forums/attachment.php?attachmentid=21425&stc=1&d=1153330826 This is the setup I used to chisel away until the end: http://legacygt.com/forums/attachment.php?attachmentid=21420&stc=1&d=1153330826 This takes patience and careful cutting skills. I recommend using a pliers and fine serrated knife the entire time (and maybe thick gloves). With the chip out, I placed it inside the ignition circle (right under the key insert) and put in my non-chipped sti key. Bingo, car started! I might try to implant this chip in the STI key. Or adhere it to the steering column area. Or you could make a ring out of it, or whatever you want. Note. Be careful trying to start the car with the chip too far away from the key insert. Your car alarm may go off. Enjoy! Link to comment Share on other sites More sharing options...
psucaptainkickass Posted July 19, 2006 Share Posted July 19, 2006 Dude, that is awesome...mad hacking skills! Link to comment Share on other sites More sharing options...
G.T.Subie Posted July 19, 2006 Share Posted July 19, 2006 I wouldn't keep that in the car. That is a lot of work for qa key. Denial is your best friend Link to comment Share on other sites More sharing options...
Brady Posted July 19, 2006 Share Posted July 19, 2006 wow... Are you a friend of Hogmeat's??? Pretty hardcore mod. You might not want to attach the chip to the column, as it makes it much easier for someone to steal the car without your key. :lol: Why not just buy a 2005-2006 STi key and still have a chip without making it easier for someone to steal your car? Link to comment Share on other sites More sharing options...
Guest *Jedimaster* Posted July 19, 2006 Share Posted July 19, 2006 Link to comment Share on other sites More sharing options...
johnAWD Posted July 19, 2006 Share Posted July 19, 2006 Will subaru cut & program a wrx sti key for non-sti cars? Why not just buy a 2005-2006 STi key and still have a chip without making it easier for someone to steal your car? Link to comment Share on other sites More sharing options...
CasopoliS Posted July 19, 2006 Share Posted July 19, 2006 Man this is hilarious. I don't even like the look of the STi key... but mad props for an interesting mod. Why in the heck would you want to hold the LGT key next to the STI key just to start the car? Its a key. It starts the car. Why would you carry 2 around just for that. I love the tools used too. A leatherman tool and a kitchen knife. Hilarious. Link to comment Share on other sites More sharing options...
Brady Posted July 19, 2006 Share Posted July 19, 2006 Will subaru cut & program a wrx sti key for non-sti cars? I can't imagine why not. Link to comment Share on other sites More sharing options...
bosco Posted July 19, 2006 Share Posted July 19, 2006 that boy needs a hobby fast, before he totally destroy's his car. lol bosco Stay Stock Stay Happy Link to comment Share on other sites More sharing options...
dtmenace Posted July 19, 2006 Share Posted July 19, 2006 i am having trouble reaching the keyboard from the ground and i can't catch my breath!!! Friend of Hogmeat...Hilarious! Leatherman tool...OMG! The shape the chip was in when you finished...Priceless! Link to comment Share on other sites More sharing options...
Triskite Posted July 19, 2006 Author Share Posted July 19, 2006 Welcome to the site! wow... Are you a friend of Hogmeat's??? Pretty hardcore mod. You might not want to attach the chip to the column, as it makes it much easier for someone to steal the car without your key. haha thanks heights no im not well its not so much just for the sti key... with the chip movable like this it means that i will never have to pay the steep price for a chipped key again (and the $100+ for the dealership to reset the car/keys), and can make as many copies as i want (PS no I didn't know the new sti key was chipped, but nonetheless, I would rather take the cheaper approach that is infinitely more flexible) I probably won't keep it in the car. I slapped on some velcro just to try it out: http://legacygt.com/forums/attachment.php?attachmentid=21449&stc=1&d=1153339966 http://legacygt.com/forums/attachment.php?attachmentid=21451&stc=1&d=1153339966 (I actually moved the velcro a little bit while i was in the car, so those pics arent accurate) hahahaha gross http://legacygt.com/forums/attachment.php?attachmentid=21454&stc=1&d=1153339966 http://legacygt.com/forums/attachment.php?attachmentid=21457&stc=1&d=1153339966 http://legacygt.com/forums/attachment.php?attachmentid=21456&stc=1&d=1153339966 going for a theme here (of blue) http://legacygt.com/forums/attachment.php?attachmentid=21455&stc=1&d=1153339966 And when the key is turned: http://legacygt.com/forums/attachment.php?attachmentid=21452&stc=1&d=1153339966 http://legacygt.com/forums/attachment.php?attachmentid=21453&stc=1&d=1153339966 uh yeah so basically now we know that the chip will work to turn on the car that way, but if the chip is sideways the wrong way (with writing facing away from the ignition column) the car will not start verrrry touchy sensor for the chip. Link to comment Share on other sites More sharing options...
Triskite Posted July 19, 2006 Author Share Posted July 19, 2006 yeah i thought you guys would get a kick out of this Link to comment Share on other sites More sharing options...
dtmenace Posted July 19, 2006 Share Posted July 19, 2006 http://legacygt.com/forums/attachment.php?attachmentid=21450&stc=1&thumb=1&d=1153339953 DIIIPPLOOOOMATIC IMUUUNITY...HA...HA...HA! Link to comment Share on other sites More sharing options...
coxx Posted July 19, 2006 Share Posted July 19, 2006 Are you a friend of Hogmeat's??? .. "Barack Obama, mothaf#%@a! Barack Obama! I'm the president...of hittin' the ass!" -this is not a political view it's merely a quote from a hilarious tv show. Link to comment Share on other sites More sharing options...
GTsleeper Posted July 19, 2006 Share Posted July 19, 2006 :lol: Link to comment Share on other sites More sharing options...
AWD_Rules3830 Posted July 19, 2006 Share Posted July 19, 2006 ok ... let me get this str8, im going to rip up my legacy key so i can attact my chip in whether "nice looking" fashion to an Sti key ... lol. idk lol. If the Sti keys are chipped i think i will ask my dealer to make me one, i think they will do it for free. lol. idk. I love my car ... basically. Link to comment Share on other sites More sharing options...
f1anatic Posted July 19, 2006 Share Posted July 19, 2006 This is t3h dumbest mod ever. He scores high on being unique and good with tools but the idea behind it is as dumb as it gets. It's a key. It is big and the remote control is even bigger. But ultimately it is a smart key and should be kept as such. Link to comment Share on other sites More sharing options...
NutBucket Posted July 19, 2006 Share Posted July 19, 2006 I can't believe you used that kitcken knife on your key. For the love of god get some real tools!!! Link to comment Share on other sites More sharing options...
hondas123 Posted July 19, 2006 Share Posted July 19, 2006 This is my favorite walkthrough. - The Mortgage Man Link to comment Share on other sites More sharing options...
Triskite Posted July 19, 2006 Author Share Posted July 19, 2006 This is t3h dumbest mod ever. He scores high on being unique and good with tools but the idea behind it is as dumb as it gets. It's a key. It is big and the remote control is even bigger. But ultimately it is a smart key and should be kept as such. lol idea behind it = i needed another key for my bro, now i can make one for $1 at home depot instead of $180 for dealership/key blank fees Link to comment Share on other sites More sharing options...
Deer Killer Posted July 19, 2006 Share Posted July 19, 2006 You could just hide the valet key in the steering column box. That would have been much easier. Except your car can be started with a screwdriver. Link to comment Share on other sites More sharing options...
AK Wagon Posted July 19, 2006 Share Posted July 19, 2006 Velcro with chip attached cancels out any cool factor... Link to comment Share on other sites More sharing options...
CasopoliS Posted July 19, 2006 Share Posted July 19, 2006 lol the picture says "beautiful" - riiiight. turn that thing over !!!! Link to comment Share on other sites More sharing options...
ZinFreak Posted July 20, 2006 Share Posted July 20, 2006 Holy F*KING SH*T! Dude, do you use an ax for a fly swatter? I guess I just don't get it... Its your car and keys, do with it what you will. Be well, and stay away from the kitchen knives, buy a Dremel. -Zin 06 LGT LTD GRP 5MT 07 FXT LTD OBP 4EAT Link to comment Share on other sites More sharing options...
pillboy Posted July 20, 2006 Share Posted July 20, 2006 A few things... This is one of the better done write-ups I have looked at...spacing, spelling, pictures, explanation, coherency, etc. Maybe he should hire out to those of you with third grade English skills. I happen to like the STi key better than what we have. I would prefer an unchipped key since I hate the extra weight and volume in the pants pocket. He got the job done with the tools he had. Maybe it was a Ginsu knife...don't you guys watch late night TV...they will cut through anything and mom will never know you even used it. Plus, he didn't make a trip to the ER for stitches (or at least he didn't tell us). Flame away bishes. It is still ugly. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.