Jump to content
LegacyGT.com

does somebody want to write up a quick walkthrough on installing new springs?


rallispec

Recommended Posts

I searched and haven't come up with anything -- please link if you know of existing walkthrough.

 

I'm just looking for a quick guide to installing new springs so I know what to expect and can go grab any tools I need.

 

THanks

Link to comment
Share on other sites

Take old springs and shocks off and put ew ones on, quick enough :lol:

 

The frotns are easy. the reaars are easy if you are going to a shorter spring becasue you don't need a spring compressor, but if you ae going to a taller spring (or putting the stock ones back on)you will need a spring compressor. YOu also need either an impact gun or a pass through socket to get the top bolt off.

Link to comment
Share on other sites

you need a spring compressor not to physcally fit the springs (you can mussle them in) but inorder to remove the tension in order to correctly align them

 

the progress springs were VERY VERY picky about perfect alignemnt top and bottom

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use